Mid-West Companies
1-877-454-3055

Corrosion X Products

CorrosionX is also the best lubricant you can use for maritime applications. It does not attract dust, outperforms lubricants fortified with Teflon* (PTFE), and due to it's unique polar bonding technology, CorrosionX repels water, and doesn't dissipate quickly or wash off in harsh saltwater environments. Use CorrosionX on throttle cables, steering mechanisms, seat swivels, locks, travelers, winches, pulleys, furling systems, tracks and on any other gear that would benefit from lubrication.

Due to its extraordinary dielectric properties, CorrosionX should be applied to all battery terminals, terminal strips, ignition switches, electrical connectors, circuit breakers, fuse holders, light switches, light sockets, electrical plugs, blower motors and fans to protect them from corrosion, extend their life and keep them working reliably. Although CorrosionX is inherently nonflammable, the environmentally-friendly propellant used in our aerosol cans is flammable. Please use caution when applying to electrical equipment. Before applying, make sure there is no current running though the system and that electrical motors are disconnected before applying.

THE UNBELIEVABLE EXTREME-PRESSURE LUBRICANT WITH POLAR BONDING CAPABILITY

Works under heavy loads and high temperatures. Actually polar bonds to the metal surface and will not sling off. Penetrates into sealed bearings.

Oils normally used for lubrication are displaced by moisture and their effectiveness is lost. Even under the best circumstances, they don't last very long. Not so with SpeedX. It actually polar bonds to metal and hugs it like a magnet. SpeedX releases the surface tension of moisture, displaces it and maintains a fantastic lubricating capability.

Use SpeedX for remarkable lubrication of:

• In-line Skates

• Skateboards

• Roller Skates

• Bicycles Gears, Derailleurs

• Chains and Bearings

• Other Sports Equipment

SpeedX lubricates better than products with Teflon. It gives long-lasting, heat-resistant lubrication, decreases wear and extends the useful life of treated items. Skateboards, roller skates, chains and derailleurs operate smoother, quieter, with greater efficiency and last longer when treated with SpeedX.

SpeedX, like all CorrosionX products, has a 100% Money Back Guarantee

• Cuts through stubborn bore deposits for easier, more thorough cleaning

• Decreases fouling, even after hundreds or thousands of rounds

• Lubricates and protects mechanisms and bores even better and longer than products fortified with Teflon*

• Ideal for semiautomatics and automatics

Sticks to metal like a magnet to prevent rust ... even in the rain .

CorrosionX for Guns comes in a 4 oz. (113.4g) plastic bottle, with an applicator tip that's ideal for firearms. It's easier than ever to apply the product, and get maximum protection and performance.
 

SPACE AGE PROTECTION FOR YOUR CAR, TRUCK, BOAT, RV,
AIRPLANE & MOTORCYCLE

RejeX is a thin-film polymer coating designed to provide a high-release surface. This very thin film – less than a micron thick – prevents stains and adhesion of common contaminants such as exhaust, bugs, oil, tree sap, bird droppings, road grime, brake dust, etc. It also makes graffiti easy to remove and can be applied to windshields to repel rain. It’s easy to apply and produces a deep, lustrous shine that outlasts the most popular waxes by months.

RejeX contains none of the free silicone oils found in some other products that are known to contaminate paint and cause problems when repainting.

APPLICATION
RejeX should be applied to a cool (less than 85° F) dry surface out of direct sunlight. If the surface is too hot, the coating will cure before it has properly bonded to the surface, and it won’t perform up to its potential. RejeX is wiped on, allowed to dry to a haze for approximately 20 minutes, wiped off, then allowed to cure for 12 hours.

Curing is required to allow the monomers (polymer building blocks) that make up RejeX to attach to the surface being treated and to polymerize (crosslink) into a crystal-clear, impervious film. It is very important to allow RejeX to cure for 12 hours after the haze has been wiped off. If the coating is exposed to contamination such as oil, fuel, soot, water, cleaners, etc. before it has cured, the contaminants may interfere with the film, preventing the RejeX from achieving it's maximum performance and durability.

PROTECTS AND BEAUTIFIES PAINTED METAL, GLASS, ACRYLIC, GEL COAT, FIBERGLASS, GLOSSY PLASTIC & POLISHED METAL SURFACES
RejeX is not meant to be used on porous surfaces, highly oxidized painted surfaces, or to fill fine scratches. RejeX can be applied in multiple coats, allowing 8 hours curing time between coats for deeper color and greater depth of gloss. RejeX has a higher refractive index than waxes, so it produces richer, deeper looking colors and a lustrous long-lasting finish.

RejeX can be used over existing wax; however, the duration of protection will be reduced as the softer underlying wax degrades comparatively quickly. There is no reason to wax over RejeX. As we’ve already said, RejeX leaves a shinier, longer-lasting finish than wax… and the wax can't adhere well to RejeX!

If a RejeX-treated surface needs repainting, normal paint preparation is all that’s required. Abrasive cleaners, polishes, rubbing compounds or chemical paint strippers will remove the RejeX film.

Rejex 1 Gallon